The Canon Printer Error 5B00, also known as the "waste ink absorber full" error, can be resolved using the following steps:
Reset the Printer:
Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in. Turn on the printer. This may help reset the error.
Service Mode Reset:
a. Make sure the printer is turned off.
b. Hold down the "Resume" or "Cancel" button (downward arrow icon) while pressing and holding the "Power" button.
c. Keep both buttons pressed. Release the "Resume" button, and then press it twice.
d. Release all buttons. The printer should enter Service Mode.
e. Press the "Resume" button four times. The LED indicator should alternate between orange and green.
f. Turn off the printer and then turn it back on. The error might be cleared.
Software Solution:
Use the "Service Tool" software provided by Canon to reset the printer's internal counters. This requires downloading the software and following the instructions provided. Search for "Canon Service Tool" online for the appropriate software version for your printer model.
Contact PrinterFixes Support:
If the above steps don't resolve the issue, it's recommended to contact Printerfixes tech team, we are here to provide best services to all the users at low cost.
Remember that performing any reset or software manipulation should be done with caution. If you're not comfortable with these steps, it's best to seek professional help to avoid causing further issues with your printer.
https://www.printerfixes.com/how-to-fix-canon-printer-error-5b00/